MTM Hydro Acqualine SGS35 Pressure Washer Car Wash Sprayer Gun with Stainless Steel Quick Connect Fittings and Live Swivel, High Pressure 5000 PSI Power Washer Car Washing Detailing

Product Information

We are very excited to have upgraded to this Mosmatic Nozzle Assembly from our old version and there are many upgraded differences. Mosmatic produce some of the finest iterations of components in the world using extremely high quality stainless steel. We have found that there is always a little confusion with our customers when it comes to the fan versus orifice sizes. The fan is a 25° / 40° angle, so no matter which orifice size you need, the fan will stay 25° / 40°.

YumCars suggests the following for popular machines (these look like they were chosen to achieve a pressure of 100 bar or below): Yes. M22 15mm. Select this option if you have a SunJoe, AR Blue Clean (Consumer Line), Stanley, or another pressure washer with an M22 15mm hose outlet. Includes x1 MTM Stainless Steel M22 Male (14mm) to ⅜” QD Coupler.

I see Mosmatic and MTM seem to be highly regarded. For an at home user - is it worth it to just go big and get the Mosmatic? Feels a little silly to end up with as much in the gun as I have into either (admittedly entry level) pressure washer, but I also don`t want to worry about getting some piece of junk. For Karcher K Series (K2-K4), we recommend a 3.0 orifice, for Karcher (K5-K7) we recommend a 4.0 orifice.

The final addition to this Nozzle Nozzle Assembly is the spraying mechanism, found inside the housing. After many trials and errors, we found that this US manufactured fan pattern spray nozzle is the very best and provides the truest 25° / 40° fan pattern we have seen to date which has been carefully CNC machined to precision!Item comes with everything needed to use with your Pressure wash. Just release the hose from your current trigger and clip into the bottom of this trigger gun. You can be up and running in literally 30 seconds! We pre-assemble all of our guns in house for you using teflon tape / Loctite to eliminate any leaks. Although we do our utmost best to ensure none of the fittings leak, if you do experience a leak or slight drip, firstly try tightening the fittings using a vice, and if this does not work, re-tape the fittings using high grade teflon tape, ensuring you have placed 7 wraps around the threads as a minimum. Yes. M22 14mm. Select this option if you have a Kranzle, Karcher*, Greenworks, Ryobi, or another pressure washer with an M22 14mm hose outlet. Includes x1 MTM Stainless Steel M22 Male (14mm) to ⅜” QD Coupler.

The Stubby short pressure washer trigger gun & nozzles kit makes longer pressure washer guns a thing of the past. Enhance your wash game with our short tigger gun! Now that I`m changing up my pressure washer situation, seems like a good time to upgrade the gun to something better. Specifically, I`m looking to get a short gun as the plan is to be using a cordless PW in the garage. The good news is that, much like those worn-out all-seasons, your pressure washer gun can very easily be upgraded to a better, higher-performance unit. For you home auto detailing aficionados, we’ve already looked at the best foam cannons on the market. Now, it’s time to turn our attention to the best pressure washer guns. The two go hand-in-hand; most – if not all – of the guns on this list ought to be compatible with the majority of foam cannons on the market. But if you’re ever going to maximize your car detailing capabilities at home, both the foam cannon and pressure washer gun have to be of a particular quality, and in tip-top shape.No. Select this option if you already have an MTM coupler for the hose. No hose coupler will be included. These QDs are sourced from MTM. We install ⅜” male QD plug on the inlet of the sprayer and the ¼” male QD coupler on the outlet of the sprayer for you. In short, the orifice size is determined by the pressure output (measured in PSI), and the maximum flow rate of your pressure washer machine to ensure you get the optimal flow rate and output at the tip. By choosing an orifice size which is either too small or too big, it can put extra strain on your machine and cause huge problems in the long run and even break your machine so it is very important that you choose the correct size.